Farm Equipment - D15 II Lift arm?

Print Page | Close Window

D15 II Lift arm?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151119
Printed Date: 04 Oct 2025 at 8:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D15 II Lift arm?

Posted By: Smitchell
Subject: D15 II Lift arm?
Date Posted: 08 Jun 2018 at 1:22pm

Whats the easiest way to remove the upper lift arm on a factory 3pt D15? I have a brand new old stock replacement but cant get the old one off that's been there since 1964. Any ideas?

Replies:

Posted By: DrAllis
Date Posted: 08 Jun 2018 at 2:00pm

You will have to slit/cut it on the thin side and use some heat to spread it apart.

Posted By: MACK
Date Posted: 08 Jun 2018 at 9:56pm

Could remove rear housing, drive pin out of center coupler, remove shaft and arm, then press arm off shaft. MACK