Print Page | Close Window

WD45 power steering?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151110
Printed Date: 25 Dec 2024 at 7:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WD45 power steering?
Posted By: Dakota Dave
Subject: WD45 power steering?
Date Posted: 08 Jun 2018 at 8:20am
Anybody have a template for the WD45 power steering pump mount. what I have is pretty wrong. I see in the agco parts book it looks like the pump is located on the left above the generator and a idler pulley on the right. even a picture of it installed would help. I have a cobbled setup that the pump is directly above the waterpump and interfears with the radiator hose.



Replies:
Posted By: allisbred
Date Posted: 08 Jun 2018 at 2:54pm
I can text you some pictures of a gas 45, however the hood is on and may not do well enough for a template. Kevin


Posted By: Don(MO)
Date Posted: 08 Jun 2018 at 4:57pm


-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.



Posted By: CTuckerNWIL
Date Posted: 08 Jun 2018 at 5:03pm
I think I have a spare mounting plate in a pile in the garage, if i can find it.


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: Dakota Dave
Date Posted: 08 Jun 2018 at 5:59pm
A mounting plate would be awesome if you could find it. Let me know what you want for it. I still taking it apart to put the pulley on the crank. Pictures could be sent just PM me and I'll sent my email


Posted By: Kenny L.
Date Posted: 08 Jun 2018 at 8:57pm


Posted By: Lon(MN)
Date Posted: 08 Jun 2018 at 9:16pm
I have one I would sell
email me and I will send pictures 
lselkriver@gmail.com


Posted By: JC-WI
Date Posted: 08 Jun 2018 at 10:28pm
down sized this image


-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: JC-WI
Date Posted: 08 Jun 2018 at 10:29pm


-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: JC-WI
Date Posted: 08 Jun 2018 at 10:30pm


-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: JC-WI
Date Posted: 08 Jun 2018 at 10:33pm
 Also have pages 5 and 6 for WD45DIESEL



-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."


Posted By: Dakota Dave
Date Posted: 09 Jun 2018 at 8:58am
The picture helped and I printed the SB pages and added to my service manual. these should help a lot I have a charlynn unit and a pump that looks a lot like the correct one. I've contacted Lon about the mount he'll sell so hopefully Ill have power steering fairly soon. as long as this works I'll put the loader back on this tractor.


Posted By: CTuckerNWIL
Date Posted: 16 Jun 2018 at 12:40pm
Good you found one. I looked thru the shop twice and can't find the one I have.
 


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: Dakota Dave
Date Posted: 16 Jun 2018 at 2:19pm
I'm making one. My charlynn pump is to bulky to fit in the stock AC pump location. Other projects have taken priority so it's good I've got shop space. At the rate I'm going it'll be a couple weeks. So far I've tore it apart and got the crank pulley changed. Right no getting the steering shaft apart is holding me up.


Posted By: Dakota Dave
Date Posted: 09 Jul 2018 at 11:51pm
Finally got the power steering install completed man dose that work nice. I still need to bend the throttle shaft. But I wired it so it won't go above idle. Filled it up and tried it it spins with one finger



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net