Charging system on 716H
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150802
Printed Date: 01 Oct 2024 at 7:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Charging system on 716H
Posted By: WD45
Subject: Charging system on 716H
Date Posted: 27 May 2018 at 8:23am
|
Is there after market part for the charging system on 716H. Thanks
-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
Replies:
Posted By: jaybmiller
Date Posted: 28 May 2018 at 6:00am
humour me, going to be stinking HOT here soon,,, what's the engine on a 716H ? Most regulators can be bought...it's the 'alternator coil' under the flywheel that can be 'fun' to acquire. disconnect plug,ru at idel, you should get 25-40 vlts AC from the alternator connector. if s GOOD, it's just a bad regulator( or ign switch).
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: WD45
Date Posted: 28 May 2018 at 8:15am
Has single cylinder Kolher engine
-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
Posted By: jaybmiller
Date Posted: 28 May 2018 at 3:28pm
hmm, probably has a 3 by5by2 'brick of fluted aluminum' style regulator with 3 spades. 2 go to the Alternator coil the 3rd supplies DC to the keyswitch. Big thing is that it MUST be solidly grounded. I'd remove clean everything, then put back on. If not charging , you may have a bad ammeter. Put DVM on regulator side and run the engine, should get say 14 volts, more at high revs. If so, put DVM +ve on 'load' side of ammeter, it should be the same. If NO volts, ammeter is kaput.
I've actually got 1 or 2 of them here..'somewhere'. dang hot 90*F in the shade !
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|