Farm Equipment - 220 brakes

Print Page | Close Window

220 brakes

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150762
Printed Date: 18 Aug 2025 at 12:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 220 brakes

Posted By: fastallis
Subject: 220 brakes
Date Posted: 25 May 2018 at 4:04am

Yesterday my dad was working the 220 with a vertical tillage tool. He did close to 40 acres. When the right brake started to get really Hot. The tractor doesn't pull to the right at all and it still actuate fine. I loosened the pedal adjustment after it cooled down. Took it down the road a bit and it was warming up again. I put relined disc on a couple years ago new springs and balls. I chisel plowed last fall no problem. I don't have time to tear it apart now. What could be going on? I hope it didn't burn up the shaft seal? Has anyone had this happen? Thanks

Replies:

Posted By: DrAllis
Date Posted: 25 May 2018 at 3:33pm

Did you grease or anti-seize the ball pockets and the machined rub pads on the O.D. of the plates ??????