d21 narrow front
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150640
Printed Date: 28 Sep 2024 at 6:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: d21 narrow front
Posted By: d17brown
Subject: d21 narrow front
Date Posted: 20 May 2018 at 6:10pm
looking for a narrow front to put on d21 or light weight wide front
-------------
phil
|
Replies:
Posted By: PaulB
Date Posted: 21 May 2018 at 12:22am
Get out your torch and welder. I have seen one from a WC under a D21. Use your imagination.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: DougG
Date Posted: 21 May 2018 at 7:51pm
|
Use a 200 hollow,, cost redused wide front, they are a little narrower but use 1 inch spacers and it works that's the best route
|
Posted By: 7040
Date Posted: 24 May 2018 at 7:19am
|
What weight are you trying to get down to
|
Posted By: d17brown
Date Posted: 24 May 2018 at 9:10pm
Posted By: d17brown
Date Posted: 24 May 2018 at 9:11pm
have wide on it yet, but took out the heavy cast and made the plate for it to pivot on. it weighs 7800 right now
-------------
phil
|
Posted By: DarrylinWA
Date Posted: 25 May 2018 at 7:13am
I had a D17 front end on my D 21 that originally came from Doyle Bounds in MO. Now Dustin Swall in CA. has thing. I had in down to 7500 lbs., but could not make weight and pulled pretty good in the 8000 lb class.
-------------
B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling.
|
Posted By: timmypuller
Date Posted: 26 Jul 2018 at 11:50am
D 17 wide front works well.
That's what I have on mine
I would cut the axles down where only 2 holes remain.
|
Posted By: d17brown
Date Posted: 29 Jul 2018 at 7:55pm
do you know the weight difference in the d17 and d21 wide fronts
-------------
phil
|
Posted By: timmypuller
Date Posted: 03 Sep 2018 at 8:42pm
I was pulling in the 8200 lb class with the stock front end and cast in it.
I'm down to 7300 lbs with no weights or driver.
I also put lighter frame rails off an old Superstock on it at that time and 7.50 x 16 front tires.
My guess is it took about 200 lbs off comparing the 2.
You could lose more cutting it down tho
|
|