wd/wd45 eccentric pin snap ring question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15015
Printed Date: 03 Feb 2025 at 9:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wd/wd45 eccentric pin snap ring question
Posted By: ChuckLuedtkeSEWI
Subject: wd/wd45 eccentric pin snap ring question
Date Posted: 11 Jul 2010 at 8:23am
| Took a set of eccentrics and put them in my electrolysis tank to clean them up. After two days, they spun easily, but I was going to take them all the way apart to clean up the eccentric pin and then reassemble with some antiseize. Question is, does anyone have a source for the eccentric pin snap rings that are on the back. Two of the four that I took apart, the snap ring just crumbled from being so rusted and getting eaten away in the electro tank. I would like to buy a bunch of them so that I have some on hand and will put new ones on all eight pins that I get apart. Thanks for any help. |
Replies:
Posted By: Don(MO)
Date Posted: 11 Jul 2010 at 8:28am
|
Chuck, You might try Fastenal.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Ted in NE-OH
Date Posted: 11 Jul 2010 at 3:03pm
|
Sandy Lake has them 888-252-0656 ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: bigfish_Oh
Date Posted: 11 Jul 2010 at 9:17pm
|
Chuck, I forget, was you going to make Dale's this weekend?
------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Posted By: orangereborn
Date Posted: 11 Jul 2010 at 9:45pm
| Don/Chuck...I went the Fastenal route last year w/o any luck....Dale |
Posted By: Eldon (WA)
Date Posted: 11 Jul 2010 at 10:36pm
|
I think if you can find a spring of the same approximate dia, mount it on a bolt and run a die grinder down the length of it you can have a lot of them. I've been thinking of doing this, but haven't had the need yet. ------------- ALLIS EXPRESS! This year: |
Posted By: Brian G. NY
Date Posted: 12 Jul 2010 at 8:37am
|
Hey now Eldon,
That sounds like a plausible idea. I do a lot of innovating myself but never thought of that one. Thanks for sharing!!
|
Posted By: BILLP-SE-MI
Date Posted: 12 Jul 2010 at 9:13pm
|
Hey a few years back I needed some of those lock rings. there was a place in Toledo Oh. Spring time Manufacturing. Here's what they helped me out with. I saw the guy put this spring on a cutting press and popped them off one at a time..
Chuck , How many do ya need. The one with tape is orignal
 |