Triple Remotes?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15006
Printed Date: 18 May 2025 at 10:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Triple Remotes?
Posted By: Claus
Subject: Triple Remotes?
Date Posted: 10 Jul 2010 at 10:25pm
|
Did AC offer factory triple remotes on any tractor? Which ones?
|
Replies:
Posted By: Dave King
Date Posted: 10 Jul 2010 at 10:31pm
|
I think that all of the 7000 and 8000 series were available with them, and I imagine the 6000 series too, but I'm not sure.
|
Posted By: Adam Stratton
Date Posted: 11 Jul 2010 at 7:35am
|
We've got triples on a 7060 and a 7580, they had the places for them on most of the 7000 tractors, it was just an option. It looks like you could add on another unit to a set that only has a pair fairly easily, but Ive never done it.
|
Posted By: GregLawlerMinn
Date Posted: 11 Jul 2010 at 8:51am
Don't know if "original" (looked right tho) but had a D19D W/3 remotes; 2 were for a double acting cyl, 1 for a single acting cyl. 3 levers on the valve spool; 1 for the double acting remotes, 1 for the single acting remote, and one for the rear lift arm rams.
-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
Posted By: cwhit
Date Posted: 11 Jul 2010 at 8:56am
|
We added a 3rd remote to our 7020 a few years ago. Got the valve and cable from a salvage tractor. Made the lever. About 3 hrs and we had it completed..
|
Posted By: wayneIA
Date Posted: 11 Jul 2010 at 9:24am
|
I'm not positive, but I think the D21's that didn't have 3 point, had the third spool used for another set of remotes. The rear plate under the fuel tank has 6 holes for remotes in my D21, but it only has 2 sets since it has the 3 point on it.
|
Posted By: Brad MI
Date Posted: 11 Jul 2010 at 10:05am
|
I don't remember the setup but we pulled 3 implements at one time, all with two way cylinders, behind the One-Ninety. 10' Disk, 11' Field Cultivator and Cultimulcher. Pa found a way to afford the tractor but not new implements, so we simply tagged up wd45/d17 implements we already had and did multiple operations in a single pass. I'm sure they all operated from the Counsel Control Center- what a great tractor for the time.
|
|