hd5 bulldozer frame
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15002
Printed Date: 04 Nov 2025 at 8:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd5 bulldozer frame
Posted By: dadsdozerhd5b
Subject: hd5 bulldozer frame
Date Posted: 10 Jul 2010 at 8:59pm
 anyone have any interest in this? it still has the trans and ring and pinion but no clutches or final drive gears. i have all those saved separately. had a bearing go in the final housing so it needs repair to use. trans has welding on it from previous repair. machine ran and drove when disassembled. anyone need anything you see? let me know and make me an offer. it is heading for the scrap yard as i don't need anything more from it. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Replies:
Posted By: Gary(WI)
Date Posted: 10 Jul 2010 at 9:46pm
| What would you want for the shift lever Gary Roidt |
Posted By: dadsdozerhd5b
Date Posted: 11 Jul 2010 at 7:03am
|
do you need just the lever or the shifter assembly? $10.00 plus shipping for just the handle, let me know if you need more. thanks. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: mbgirod
Date Posted: 26 Nov 2010 at 12:21pm
| Any chance you still have the shift lever for the HD5G? I see someone inquired in July. |
Posted By: Coke-in-MN
Date Posted: 26 Nov 2010 at 7:13pm
|
The shifter for both tranys is the same , a small stub shaft that the lever bolts onto. I believe I may have a 5G shift lever around yet.
The end of the stub shaft is easily rebuilt with a little welding and grinding to new looking and working condition. The cross bushing and the pin that holds shaft to bushing also will need tightening as well as replace the 2 bolts that go into shift tower as they wear inside bushing.
The lever it's self is different in the dozer is not offset much and after 90 deg bend, at stub shaft, comes straight up. On the 5 G it is offset more from 90 deg and bends out to allow leg room and be more compact because of loader framework making area smaller in opperators compartment. ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: dadsdozerhd5b
Date Posted: 27 Nov 2010 at 5:48am
|
i do still have it, i do not know it's condition but i will check on it. the frame is still the same as in the picture. have not got the hot wrench to it yet. i will check today and let you know it's condition. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: Coke-in-MN
Date Posted: 27 Nov 2010 at 10:31am
|
dadsdozerhd5b : the trany and gears has to be worth putting on the shelf, if it is 2 speed reverse positivly as finding the gears for that is hard. ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: dadsdozerhd5b
Date Posted: 27 Nov 2010 at 4:34pm
|
i agree about the spare parts but i already have 2 complete trannies on the shelf and this one has had issues in it's life as the case has been welded up. must have exploded at one time. one of the shifter bolts is welded in making it a bugger to get out if it is worth it at all. it is a single reverse as are my other two. i thought at least the 2 speed reverses were in the loaders only but they may have put them in the hd6, i don't know. my dozer has a 2 speed reverse from a loader. if anyone os interested in the whole tranny for parts, i will take a small (scrap price) offer for the entire tranny. it did move and shift correctly when it was disassembled. i kinda figured the 2 speeds were hard to get parts for aas i am always on the lookout for a spare. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: Coke-in-MN
Date Posted: 28 Nov 2010 at 9:29am
|
All the other gears are the same just that the ideler for reverse has 2 sets of gear teeth and the slider gear that meshes from mainshaft. Have a set of gears and shafts from single reverse on shelf also but sold last 2 sp trany I had . ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |