B- manifold studs.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14954
Printed Date: 03 Feb 2025 at 3:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B- manifold studs.
Posted By: Bee
Subject: B- manifold studs.
Date Posted: 09 Jul 2010 at 6:30pm
|
Do the manifold studs on a "B" cylinder head go through to the water jacket? do they need sealant? Thanks! ------------- Bob, North Carolina 1949 B |
Replies:
Posted By: Charlie175
Date Posted: 09 Jul 2010 at 7:00pm
|
2 or 3 of them do.
------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Dick L
Date Posted: 09 Jul 2010 at 7:20pm
 None of the heads I have ever worked on did. If the holes go into the water jacket it would be because someone sometime or other drilled to deep when drilling out a broken stud. |
Posted By: Bee
Date Posted: 09 Jul 2010 at 8:53pm
|
Thanks Dick L !
------------- Bob, North Carolina 1949 B |
Posted By: Dick L
Date Posted: 09 Jul 2010 at 9:21pm
| You can poke a wire or drill bit in each one to make sure someone has not drilled it deeper than they should have. |