Allis sickle mower model?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149508
Printed Date: 14 Nov 2024 at 8:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis sickle mower model?
Posted By: 7060
Subject: Allis sickle mower model?
Date Posted: 15 Apr 2018 at 7:13pm
| I just bought a Allis sickle mower to restore and probably mow my pond bank. I’m wanting to buy a manual for it but unsure of the model. It is a 2 point with a dolly wheel in the back. All I can find are the 80R or 80T but this isn’t full trail type or full 3 point. |
Replies:
Posted By: Mikez
Date Posted: 15 Apr 2018 at 7:29pm
| Is it 3pt hitch arms and a dolly wheel. Think that's a 82R. I might have a book |
Posted By: cjallis
Date Posted: 15 Apr 2018 at 7:30pm
| It could be a model 3 mower also. It has single wheel behind. |
Posted By: 7060
Date Posted: 15 Apr 2018 at 7:36pm
|
Posted By: 7060
Date Posted: 15 Apr 2018 at 7:38pm
| This is what it looks like. Only picture I could find online of one but no info. I assume the 80 series manuals are mostly the same, but I would like to find the right one or close to it. |
Posted By: Mikez
Date Posted: 15 Apr 2018 at 7:43pm
| Yes that's an 82R. I just looked I don't have a book |
Posted By: 7060
Date Posted: 15 Apr 2018 at 7:55pm
| Ok thanks. I’m sure the book will say, but what is the rear hitch for? |
Posted By: Chad(WI)
Date Posted: 15 Apr 2018 at 7:59pm
| Rear hitch is for pulling a conditioner. |
Posted By: Mikez
Date Posted: 15 Apr 2018 at 8:08pm
| Yup chad beat me to it. There was a pto stub bolted to back of the pully |
Posted By: 7060
Date Posted: 16 Apr 2018 at 7:44am
| Is there a aftermarket place to get the guards and hold down clips or are they brand specific? |
Posted By: DonDittmar
Date Posted: 16 Apr 2018 at 7:48am
|
I think that is an 82R3 isnt it? 82R was 3 point mount that raised and lowered with the 3point and had no tail wheel 82R3 had the tail wheel(semi mount) mounted to the 3 point, and raised and lowered with the cylinder ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |
Posted By: Gary Burnett
Date Posted: 16 Apr 2018 at 7:53am
| Several manuals on ebay |
Posted By: Gary Burnett
Date Posted: 16 Apr 2018 at 7:58am
That's an 82R,the only R3 mower was the 80R3 the only true 3pt mower AC ever built. |
DonDittmar wrote:Posted By: DonDittmar
Date Posted: 16 Apr 2018 at 8:06am
|
I am looking for one like in the photo. It would be handy for doing the roadsides...... ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |
Posted By: Gary Burnett
Date Posted: 16 Apr 2018 at 8:14am
I have one I'll sell. |
Posted By: Mikez
Date Posted: 16 Apr 2018 at 2:38pm
| Theres brackets that go over the 3pt pins and go up to the center link bracket of tractor. Hope that made sense lol. But if i remember right they were a pain in the but to get in |
Posted By: Gary
Date Posted: 16 Apr 2018 at 3:31pm
|
Link to Manual on ebay: Gary https://www.ebay.ca/itm/ALLIS-CHALMERS-MODEL-82R-SICKEL-BAR-MOWER-SEMI-MOUNTED-OPERATORS-MANUAL-SICKLE/182022103835?hash=item2a615ce31b:g:ooUAAMXQbBVRB6mK" rel="nofollow - https://www.ebay.ca/itm/ALLIS-CHALMERS-MODEL-82R-SICKEL-BAR-MOWER-SEMI-MOUNTED-OPERATORS-MANUAL-SICKLE/182022103835?hash=item2a615ce31b:g:ooUAAMXQbBVRB6mK |
Posted By: Brian G. NY
Date Posted: 16 Apr 2018 at 4:07pm
Model 82R Semi-Mounted - Picture from a sales brochure - shown is the PTO stub you speak of.
 |
Posted By: Matt (Jordan,MN)
Date Posted: 16 Apr 2018 at 11:31pm
|
I have a manual I will sell. $15.00 plus shipping. Matt ------------- Owner of Matt Scott LLC Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair http://www.mattscottllc.com/ |
Posted By: DonDittmar
Date Posted: 17 Apr 2018 at 5:57am
|
Yeah thats the one. The brackets going up to the center link bracket should lock it rigid so it cant raise or lower. On a D series tractor once you hit the raise lever it should send oil directly to the remote cylinder beacuse the 3 point arms would be lock solid. Our Woods 3 point backhoe is set up like that. Once it is on the 3 point cant go up or down, it just hangs there lol ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |
Posted By: DonDittmar
Date Posted: 17 Apr 2018 at 6:00am
A little closer to MI would be nice........i think the transport costs would kill this deal lol ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |