WD45 service manual
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149401
Printed Date: 27 Apr 2024 at 4:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 service manual
Posted By: ALinIL
Subject: WD45 service manual
Date Posted: 12 Apr 2018 at 11:54am
|
Am looking for an electronic copy of service manual. I lost mine in my old computer with a lightning strike along with all of my other service manuals. Any help with getting a free copy would be appreciated. ALan
|
Replies:
Posted By: Gerald J.
Date Posted: 12 Apr 2018 at 1:53pm
|
http://www.grandpastractor.com" rel="nofollow - http://www.grandpastractor.com is a good place to look. Gerald J. |
Posted By: Gary
Date Posted: 12 Apr 2018 at 4:40pm
|
I downloaded both the Service Manual and Parts Catalog from Grandpas Tractors. Gary |
Posted By: sadmyentist
Date Posted: 14 Apr 2018 at 4:23pm
| Pm me if you can't make grampa's work & I'll email it to you |
Posted By: Allis Wd45
Date Posted: 20 Jan 2019 at 8:55pm
|
Does someone happen to have the PDF file that could be emailed to me? Thanks,Aaron ------------- WD45 IH Cub Cadet 149,1650,1250 #2 Cart, IH#2 Tiller |
Posted By: sadmyentist
Date Posted: 23 Jan 2019 at 7:24pm
| I got Aaron covered here. |
Posted By: silverad
Date Posted: 27 Jan 2021 at 10:33pm
|
Hello So, I just purchased a WD45, It sat for about 5 years, but looks to be in pretty good condition, and I am hoping it will fire up with not a whole lot of work. I am wanting to obtain Operator Manual and Service Manual PDFs I tried to find that Grandpa Tractor website, but it seems to have gone away. Can anyone steer me to another source for these PDFs? Also, this is a wide front end WD45, and the cross bar (the long channel section that pivots on the tractor) is bent. I asked the seller about it and sure enough, he said he tried to lift a huge concrete block with the bucket and bent the cross bar. So, can it be straightened? I have a real strong bottle jack, 30 ton or so, and a real beefy steel I beam, Seems to me that the crossbar could be pulled back into position with chains at each end and the jack in the middle??? Thanks for your input |
Posted By: Jim.ME
Date Posted: 28 Jan 2021 at 5:23am
|
Grandpa's Tractors site has been dead for quite a time now. I don't know if any of the vendors that advertise here have electronic copies of the AC manuals for sale. Here is a link to the AGCO publications site where you can purchase the books in electronic or printed form. I will say AGCO's prices are reasonable compared to many. You need to be careful, not just of security, but because of some of the electronic copies advertised on the web are I&T manuals, or they may be incomplete. https://www.agcopubs.com/" rel="nofollow - https://www.agcopubs.com/ This site ( https://archive.org/details/collection_01_allis_chalmers_manuals/1-Row-Combination-Planter-TM-390001" rel="nofollow - https://archive.org/details/collection_01_allis_chalmers_manuals/1-Row-Combination-Planter-TM-390001 ) has a number of the real AC manuals for different tractors and equipment, and some manuals that are I&T. These can be downloaded (free) and saved. It isn't bad to have a copy of the I&T manual to go with the AC manual, but the AC one is needed. JMHO |
Posted By: silverad
Date Posted: 28 Jan 2021 at 10:40am
|
Hello Hey thanks for the referral, I was able to download the WD45 operator manual and parts book. They do not seem to have the WD45 service manual, but I did find the WD service manual here https://www.pdfmanual4trucks.com/allis-chalmers/" rel="nofollow - https://www.pdfmanual4trucks.com/allis-chalmers/ if anybody wants one of those Any input on staightening that WD45 wide front end??? Thanks again.... |
Posted By: Jim.ME
Date Posted: 28 Jan 2021 at 11:07am
The actual service manual for the WD45 is the same manual for the D14, WD, and WD45. AGCO publication # 79003405 is the part number for it. It is only about $32. right from AGCO. |