County line carry all for Allis Chalmers CA?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149258
Printed Date: 28 Jun 2025 at 1:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: County line carry all for Allis Chalmers CA?
Posted By: Hunt4Allis
Subject: County line carry all for Allis Chalmers CA?
Date Posted: 07 Apr 2018 at 4:01pm
| Will this brand work for a 1953 model CA? I'm looking at using this for cleaning up some hay after I mount it to the rear of my CA I'm going to fabricate some Forks for picking up hay it is a narrow front end and I do not want to fabricate a front end loader on it with having to make it a wide front end so it's more stable |
Replies:
Posted By: jaybmiller
Date Posted: 07 Apr 2018 at 4:24pm
|
You should post a link to which one,I saw one at TSC and it's a 3pt unit and $369 !. My CA was snap coupler. Now I made my own for 'Troy', my first D-14. Cost maybe $30 for some of the steel. It was easy to build and has hauled 1000# logs on it ! I used 42" forklift forks and added a 2" receiver so could tow any kind of trailer. I got rid of the loader as the carryall was far easier to use ! ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Hunt4Allis
Date Posted: 07 Apr 2018 at 4:38pm
|
It's the yellow model that's 149$ Good reviews, I'm just unsure if it will work with a CA type 3. Hitch? |
Posted By: steve(ill)
Date Posted: 07 Apr 2018 at 8:46pm
|
yes, that will fit a CA with a 3 point... The pins are category 1 and your CA should be category 2.. So the pins MIGHT be 1/4 inch smaller in diameter and have some slop.. You can use it that way, or buy bigger pins and screw them on... but will work the way it is. https://www.tractorsupply.com/tsc/product/countyline-carry-all" rel="nofollow - https://www.tractorsupply.com/tsc/product/countyline-carry-all ------------- Like them all, but love the "B"s. |
Posted By: Hunt4Allis
Date Posted: 07 Apr 2018 at 8:54pm
|
Thanks, Now I need to buy/ weld and cut to create a pitch fork type look with some more angle iron( kinda like a pitch fork on steroids is what I'm picturing) |
Posted By: DiyDave
Date Posted: 08 Apr 2018 at 5:20am
OR just spend an extra 4-5 bucks, on cat 1 to 2 bushings...  https://www.tractorsupply.com/tsc/product/countyline-category-2-to-1-lift-arm-bushing?rfk=1" rel="nofollow - https://www.tractorsupply.com/tsc/product/countyline-category-2-to-1-lift-arm-bushing?rfk=1
|
steve(ill) wrote: