Hooking plow to a B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149164
Printed Date: 19 Oct 2025 at 2:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hooking plow to a B
Posted By: Ranse
Subject: Hooking plow to a B
Date Posted: 04 Apr 2018 at 9:06pm
|
I know this question has been asked before. A guy at work just acquired his Dad's B and it has two turning plows with it. He said he couldn't figure out how they hooked up so he asked me if I knew. I said I didn't but I'd try to find out. Any pics or info would be appreciated. He is supposed to send me some pics of his plows and tractor. I will post them when I get them, that may help. Thanks. |
Replies:
Posted By: steve(ill)
Date Posted: 04 Apr 2018 at 9:20pm
probably has a PIN on a cross bar below the transmission... then the Rock Shaft lift arms in the back. ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 04 Apr 2018 at 9:26pm
setting under the motor and looking backward, the silver pin attaches the beam to a bracket that is hinged on each final drive case... most setups have a lever attached to the bracket so you can raise and lower the front of the beam from setting in the seat... or you can have a solid mount so it will not raise and lower. ------------- Like them all, but love the "B"s. |
Posted By: 1939Dodge
Date Posted: 05 Apr 2018 at 7:32am
|
I just bought a set of plows and mounts from a C. I want to use it on my B. The crossbeam that mounts between the final drives is too long. I'm looking for the correct beam for a B, willing to purchase, or trade if someone can use it. Thanks! |