Farm Equipment - Torque specs for WD

Print Page | Close Window

Torque specs for WD

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14906
Printed Date: 03 Feb 2025 at 3:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Torque specs for WD

Posted By: Phil (WY)
Subject: Torque specs for WD
Date Posted: 08 Jul 2010 at 4:18pm

Can anyone tell me the torque specs for the rod bearings and head bolts on a

WD? I finally got all my parts I need to put it back together. Thanks i advance. Phil

Replies:

Posted By: R Aiken
Date Posted: 08 Jul 2010 at 4:43pm

Could not find my WD book, A D17, rod bolts 45 to 55, head bolts 1/2" 90 to 95, 7/16" 70 to 75. A WD would be close.

Posted By: Fidel513mo
Date Posted: 08 Jul 2010 at 5:34pm

phil you need to be sure you placed your rod to piston and pin correct. if not you will scar the sleeve wall.

Posted By: Phil (WY)
Date Posted: 09 Jul 2010 at 4:22pm

Thanks for the advice. What do I need to be sure of when putting together rod, piston and pin? Phil

Posted By: Fidel513mo
Date Posted: 09 Jul 2010 at 6:35pm

you will need a it manual it shows what the placement is. if i knew how to post and scan it out of my manual i would. maybe one of this site members could. sorry.