Construction and other equipment - Backhoe Pins/Bushings

Print Page | Close Window

Backhoe Pins/Bushings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14859
Printed Date: 31 Oct 2024 at 8:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Backhoe Pins/Bushings

Posted By: easygoin4
Subject: Backhoe Pins/Bushings
Date Posted: 07 Jul 2010 at 3:06pm

I am a fairly new owner of a stock I-40 Loader/Backhoe. I would like to change or at least tighten up the pins on backhoe bucket, booms and arms. Any Suggestions on where I should start or replacement parts. Thanks for any advice...

Chris

Replies:

Posted By: Coke-in-MN
Date Posted: 07 Jul 2010 at 5:25pm

Bushings are a easy replace but if holes are worn then welding up and line bore to install new bushings gets expensive. Bucket pin holes can be cut out and new piece welded in with proper hole size as it is not a pivit point on pin. New pins can be made or ordered

Bushings may bwe found at bearing house or from most construction dealerships. Just measure size , they can be cut off if to long.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: john(MI)
Date Posted: 08 Jul 2010 at 9:09am

PM me. I have a friend that does that work. We live in Fenton MI.

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: pineyjd
Date Posted: 09 Jul 2010 at 4:31pm

ChecK serial # on unit ,I think my book has bachoe part #.My I 40 is a henry hoe att.1960-62 ??

Posted By: easygoin4
Date Posted: 12 Jul 2010 at 7:10am

Thanks-

I think the serial number is 1429.

It is an Allis backhoe and I do have the parts manual for it- I just think I would not be able to find OEM parts.

Thanks Again