3 point conversion kit
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148417
Printed Date: 26 Feb 2025 at 6:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3 point conversion kit
Posted By: Steve R
Subject: 3 point conversion kit
Date Posted: 12 Mar 2018 at 2:56pm
| Does anyone have or know where to get a 3 point conversion kit for a WD? I think I really need to put one on my tractor. |
Replies:
Posted By: Sugarmaker
Date Posted: 12 Mar 2018 at 3:01pm
|
Several of the sponsors have these. and Stieners has them too. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: DaveKamp
Date Posted: 12 Mar 2018 at 6:48pm
I made mine... used lift arms and links from Farm & Fleet...
------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: DaveKamp
Date Posted: 12 Mar 2018 at 6:50pm
Here's where I put the top link... Usually, guys use a strap to the rockshaft...
------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: DaveKamp
Date Posted: 12 Mar 2018 at 6:52pm
Here's how I fastened it:
------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: DaveKamp
Date Posted: 12 Mar 2018 at 6:54pm
And here's the one I made for my D17: ------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: steve(ill)
Date Posted: 12 Mar 2018 at 8:13pm
|
http://www.tonystractors.com/ac3ph.htm" rel="nofollow - http://www.tonystractors.com/ac3ph.htm ------------- Like them all, but love the "B"s. |
Posted By: Burgie
Date Posted: 13 Mar 2018 at 7:15am
|
I have got several from Tony. They ship out of the Midwest and made by Cross. I really like those because you don`t loose the drawbar and the traction booster still works. ------------- "Burgie" |
Posted By: Gary Burnett
Date Posted: 13 Mar 2018 at 7:49am
|
Biggest problem I've seen with the aftermarket 3pt hitches is there is little or no sway control.To be a useful hitch it needs a good easily adjustable sway control in my opinion. |
Posted By: Dakota Dave
Date Posted: 13 Mar 2018 at 3:56pm
| I have the wishbone one from Tony's tractors. It works well for me you do loose the drawbar with the wishbone but it's easy to remove or install. Just unlatch it and latch the drawbar back in. Since I have a matching pair of WD45s I leave the 3pt on one and the loader on the other. Once you put a 3pt implement on you don't want to keep switching it it nowhere as easy as a snap coupler implement. The sway control is very easy just cross the sway chains that you attach to the drawbar bail mount.my 3 point tractor goes from a snowblower in the winter to a disk in the spring and a mower in the summer. I couldn't use the draw bar with any of those installed anyway so I don't miss it. I do have a crossbar mounted one on the other tractor that would allow use of the drawbar but the lower lift arms are removed and hanging on the tractor shed wall if I ever need them. They tend to get in the way when not being used. |
Posted By: PaulB
Date Posted: 13 Mar 2018 at 3:58pm
Be sure to buy extra health hazard insurance. Hitching up 3pt implements is bound to lead to pinched fingers and sprained backs. Along with a colorful new vocabulary  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: dawntreader74
Date Posted: 13 Mar 2018 at 5:15pm
| got a 3 pt if needed i will sell |