Garden Tractors - Piston Ring End Gap on a 16HP Briggs

Print Page | Close Window

Piston Ring End Gap on a 16HP Briggs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148174
Printed Date: 01 Oct 2024 at 9:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Piston Ring End Gap on a 16HP Briggs

Posted By: KevinON
Subject: Piston Ring End Gap on a 16HP Briggs
Date Posted: 04 Mar 2018 at 6:24pm

I'm filing rings for my 16HP cast iron Briggs engine, and was wondering what I should have for end gap. .015 to .020? All that I can find is that .030 is reject gap. Thanks for the help!! Cheers.

Replies:

Posted By: steve(ill)
Date Posted: 04 Mar 2018 at 10:02pm

.004 inch per inch of diameter. ( min valve)

2 inch piston = .008

3 inch piston = .012 - .015

4 inch piston = .016 - .020

-------------
Like them all, but love the "B"s.

Posted By: KevinON
Date Posted: 05 Mar 2018 at 7:15am

Hi Steve.

Thanks for your help!