Wanted- 38" centers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14814
Printed Date: 03 Feb 2025 at 12:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wanted- 38" centers
Posted By: JoeO(CMO)
Subject: Wanted- 38" centers
Date Posted: 06 Jul 2010 at 4:25pm
|
I am looking for a pair of 38 inch centers (6 rail - 8 on 8) with adjusting clamps for D17, 170-175, 180-185.
I will be going to Dale's show
573-353-7329 or PM
------------- |
Replies:
Posted By: acben20
Date Posted: 06 Jul 2010 at 5:44pm
| if they are the same ones that were used on a high crop d17 or d15 I have a pair in the shead with clamps. also have the rims if needed call 1-507-461-2678 thanks ben~!! |
Posted By: Calvin Schmidt
Date Posted: 07 Jul 2010 at 10:18am
 Joe, I have 38" 6 rail 8 on 8's on my D-17iv diesel. They came from a M-F 65 high arch and are the same as A-C used except the excentric uses a square socket like the CA/D-10/12 instead of a hex. Only the correct cops will catch that.------------- Nothing is impossible if it is properly financed |
Posted By: Calvin Schmidt
Date Posted: 07 Jul 2010 at 4:01pm
Here is a better picture ------------- Nothing is impossible if it is properly financed |
Posted By: Calvin Schmidt
Date Posted: 07 Jul 2010 at 4:06pm
|
The 38" centers from a D-14/15 are different than the D-17 but the same as a MF 50 high arch. FYI the front rims on my 17 are from a Gleaner A. That is the only way I could get the correct offset for a true 60" row spacing. I could also get 60" using my D-19 front rims and tires. D-17's are 58" than 62". ------------- Nothing is impossible if it is properly financed |