Spring Trip Mounted AC Plows
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147859
Printed Date: 28 Sep 2024 at 3:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Spring Trip Mounted AC Plows
Posted By: WNYBill
Subject: Spring Trip Mounted AC Plows
Date Posted: 23 Feb 2018 at 9:24am
|
I have a set of 3 bottom mounted spring trip plows. One beam trips too easily. Book says to put a washer in it. I am afraid I will break something trying to get it apart. Is there an easier way????? Bill
|
Replies:
Posted By: JimWenigOH
Date Posted: 24 Feb 2018 at 6:00am
I don't know of an easier way. I'm a "do it by the book" type of guy most of the time. At least if something should break there are lots of plows at my salvage yard where I can get parts. If the job gets done right the first time, that's one less monkey on my back is the way I look at it. 
|
Posted By: PaulB
Date Posted: 24 Feb 2018 at 6:09am
|
I also believe in doing it right or don’t waste your time. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Mikez
Date Posted: 24 Feb 2018 at 10:52am
| Without digging into all my books, When I replaced everything in one of my plows I had the same trouble. Two books said differnt. One of the books said to just tighten up on the main pivot bolt a little bit causing some extra friction on the beam. It didn't take much |