Removing head from Gleaner E pull type combine
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147495
Printed Date: 02 Dec 2024 at 12:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Removing head from Gleaner E pull type combine
Posted By: olivetroad
Subject: Removing head from Gleaner E pull type combine
Date Posted: 13 Feb 2018 at 1:36pm
I purchased a Gleaner model E pull type combine. I would like to remove the header to narrow it up for the ride home. Has anyone done this? Any tips? Does anyone have a parts manual for this machine that could send me a copy of the header pages?  |
Replies:
Posted By: Joe Graunke
Date Posted: 13 Feb 2018 at 2:01pm
|
I’ll post pics of mine I brought home this fall had it tore apart and loaded in around 3 hours ------------- |
Posted By: olivetroad
Date Posted: 14 Feb 2018 at 3:47pm
| That would be great - thank you |
Posted By: V8cat359
Date Posted: 14 Feb 2018 at 5:07pm
| Good looking machine. Where did you find it? |
Posted By: DakotaSteve
Date Posted: 14 Feb 2018 at 10:16pm
| That is AWESOME! |
Posted By: CrestonM
Date Posted: 14 Feb 2018 at 10:43pm
|
I’m glad you’re saving an E. My great-grandpa and his brothers used to have a pair of them. I believe they were 38 and 41 models. Sadly, the one they held on to was scrapped just a few months ago. I wanted to save it, but it was literally just a shell. Nearly every usable part was gone. I did save the accessory unloading auger attachment, though, in hopes I get an E someday to put it on . |
Posted By: Ted J
Date Posted: 15 Feb 2018 at 3:10pm
|
BOY OH BOY!!! Reading this the first time, I'm thinking he's taking the head off the engine. Then I think,,,,,,,HOLY CHIT,,,,,,,,,,,HOW DO YOU GIT YOUR HEAD STUCK In a Gleaner?? Man-O-Man David, you had me goin there for a bit... Uff Da..... ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: Kurt WI
Date Posted: 15 Feb 2018 at 3:14pm
|
Not the gleaner E I was thinking! ------------- WD D17D 170 190xt 190xtIII 200 7020 |
Posted By: Joe Graunke
Date Posted: 15 Feb 2018 at 3:22pm
 ------------- |
Posted By: Joe Graunke
Date Posted: 16 Feb 2018 at 12:08am
 ------------- |
Posted By: Joe Graunke
Date Posted: 16 Feb 2018 at 12:15am
 ------------- |
Posted By: JohnCO
Date Posted: 16 Feb 2018 at 12:24am
|
There's a Case machine that is similar then this on a farm 8 or 10 miles from me. I could have it for the hauling but, other then it's a Case and I need another combine like a hole in my head, getting the header off so it's moveable makes it not worth trying. Yeah Creston, I also thought about how to remove a head from a combine before reading the post. Thought probably the best way would be to run it until it comes out the back... ------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |