Henderson Loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14748
Printed Date: 03 Feb 2025 at 10:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Henderson Loader
Posted By: jk
Subject: Henderson Loader
Date Posted: 05 Jul 2010 at 10:08am
|
last week i bought a handerson loader for my C. the levers on the char-lyn pump seemed to be locked up. how do i go about treaing it apart to find out what the problem is? thanks |
Replies:
Posted By: pumpkin man
Date Posted: 07 Jul 2010 at 11:38am
|
take the rear cover off after you drain the oil [of corse ] that will expo se the valve body and the pickup screen also try taking the levers off ther held on with 1/4-2 0 cap screws slide the alum. holders off the splined valve shaft may bin put on out of time |
Posted By: pumpkin man
Date Posted: 07 Jul 2010 at 6:17pm
| after sending my other message I studied your photo that loader used one way clys.I cant tell how yours hooked up the left side of the pump is for one way clys. the right side is for two way clys. cant tell how yours is plumbed up. post more photos will try to help some more you have to have a vented plug on the pump not apipe plug or drill a vent hole in that one |
Posted By: morton(pa)
Date Posted: 11 Jul 2010 at 11:37am
| You need to use a splitter to go to both cylinders after you have a hose coming out of the 1 way port on that pump. As long as you have the original 1 way cylinders and they are hooked up to the 2 way ports the loader will not work. I'd show you how mine is plumbed up but it's in pieces right now awaiting a tractor to put it back on. |
Posted By: jk
Date Posted: 13 Jul 2010 at 12:02pm
| the cylinders are plumbed together with a T. i'll tear it apart in a day or so and post back what i find. |
Posted By: morton(pa)
Date Posted: 13 Jul 2010 at 12:52pm
| Yup hook it up to the 1 way valve then. |