Farm Equipment - WD camshaft regrind

Print Page | Close Window

WD camshaft regrind

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14709
Printed Date: 03 Feb 2025 at 6:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD camshaft regrind

Posted By: wrightk20
Subject: WD camshaft regrind
Date Posted: 04 Jul 2010 at 2:15pm

I have a wd that i am restoring and i'm looking to get a little more power out of it and was wondering if it would be cast effective to have a reground camshaft made for it. If so maybe someone could let me know who might grind a wd camshaft. thanks, kevin

Replies:

Posted By: TomMN
Date Posted: 04 Jul 2010 at 2:35pm

I know Berry Cam does that both stock or for pulling.
http://www.berrycam.com/ - http://www.berrycam.com/

Posted By: mlpankey
Date Posted: 04 Jul 2010 at 6:32pm

When you install the cam. some shade tree guys advance it one tooth they think thats 6 degrees . they count the teeth and divide by 360 degrees it comes out to six degrees but it is actually more than 6 degrees in a tooth move you will find that out when you find a degree wheel in a garage to use to degree the cam in . A few minutes of time it takes makes a world of difference in where the power range is.

-------------
people if they don't already know it you can't tell them. quote yogi berra