Can someone identify this tractor?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147062
Printed Date: 19 Nov 2024 at 10:09am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Can someone identify this tractor?
Posted By: Hubnut
Subject: Can someone identify this tractor?
Date Posted: 31 Jan 2018 at 6:14pm
I've been thinking about an AC garden tractor for years. This one is close by, but it is expensive. Could someone tell me the model and if $950 for a non-running tractor is fair or not? Thanks. Seen here: https://jacksonville.craigslist.org/grd/d/1972-allis-chalmers/6478351527.html" rel="nofollow - https://jacksonville.craigslist.org/grd/d/1972-allis-chalmers/6478351527.html
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Replies:
Posted By: AC720Man
Date Posted: 31 Jan 2018 at 6:50pm
It appears to be a 314H, Kohler engine. Since it has 3 point, its most likely to have electric power take off. The H is for Hydro. A picture of the right side would verify. The 400 series had the model decal behind the Allis Chalmers decal on the hood. A good looking tractor but I feel its overpriced by $500. Especially as a non running tractor. New points, condenser, possibly a coil, carb work and your going to be over a $100 just in parts. Again, a good looking tractor, kept inside is obviously a plus.
------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Hubnut
Date Posted: 31 Jan 2018 at 7:51pm
AC720Man wrote:
It appears to be a 314H, Kohler engine. Since it has 3 point, its most likely to have electric power take off. The H is for Hydro. A picture of the right side would verify. The 400 series had the model decal behind the Allis Chalmers decal on the hood. A good looking tractor but I feel its overpriced by $500. Especially as a non running tractor. New points, condenser, possibly a coil, carb work and your going to be over a $100 just in parts. Again, a good looking tractor, kept inside is obviously a plus. |
Thank you very much for the detailed description! I needed that. I thought it might be a tad over-priced.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: Hubnut
Date Posted: 31 Jan 2018 at 7:56pm
Is the extra engine he shows one that could go into this machine? I'm wondering why he shows another engine. Is the main one blown? I need to call.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: im4racin
Date Posted: 31 Jan 2018 at 8:48pm
The extra engine is not an extra...it's the turbo blower for the bagger trailer. Also it doesn't have a 3pt hitch. It's the standard sleeve hitch that they used up to the late 90's on the 918. That is all period correct and I don't think it is over priced for all of it if that is something you are looking for.
|
Posted By: TL12A
Date Posted: 01 Feb 2018 at 2:58pm
I t's more than I would pay--You don't know how well the hydro works. I prefer the 900 series, partly because they have posi traction and you usually get a running one for less$
|
Posted By: Hubnut
Date Posted: 01 Feb 2018 at 5:47pm
Thank you. I read elsewhere that parts for the hydrostatic transmission in the 314H can't be found. I think I'll pass on this one.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: jaybmiller
Date Posted: 01 Feb 2018 at 6:05pm
That 'extra' engine(B&S) is for the leaf vacuum pickup system. engine powers a vacuum between deck chute and trailer, that has abig 'bag' for the leaves. While $950 is a lot for a nonrunner, that vacbagger system probably cost 2K. I'm thinking $700 for all, asis-whereis, should get it. I know I cam resell the vac/bagger for 700 any day of the week up here. Jay
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|