Pulling Forum - Allis 716 Motor Upgrade

Print Page | Close Window

Allis 716 Motor Upgrade

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=146763
Printed Date: 23 Nov 2024 at 9:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 716 Motor Upgrade

Posted By: KevinON
Subject: Allis 716 Motor Upgrade
Date Posted: 23 Jan 2018 at 11:26am

I am going to rebuild the 16HP Kohler in my 716 Six Speed puller. I was going to go with a Zack Kerber Gov 3 cam with the .330lift, and valve kit that he offers. I thought that I may as well do this when I am in there. I will go with a steel flywheel and front pulley as well as his reworked stock carb. I guess that my question is, would this be too much for the rear end. We are pulling what we call stock altered here in Ontario at 1150lbs. I am running 26x12x12 puller tires. I am looking to get enough power for a wee bit more speed. I am going to put a straight shaft in the axle, and make sure the bevel gear box is up to snuff. Thanks!!

Replies:

Posted By: Acllss puller
Date Posted: 24 Jan 2018 at 7:49pm

Hey Kevin , you still lookn to build a llss/LPS

Posted By: KevinON
Date Posted: 25 Jan 2018 at 7:07am

Hey Mark. I am. I will give you a shout here in the near future! Cheers.