58 d17 dsl power steering line
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=146695
Printed Date: 19 Jul 2025 at 2:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 58 d17 dsl power steering line
Posted By: LazyDFarms
Subject: 58 d17 dsl power steering line
Date Posted: 21 Jan 2018 at 2:21pm
|
Looking for the bypass line on my 58 D 17 dsl. Agco part#70229839 or the old allis part #229839. Used or new, any help is great. Thanks Dennis ------------- I'VE DONE MORE WITH LESS!! |
Replies:
Posted By: DSeries4
Date Posted: 21 Jan 2018 at 6:56pm
|
Have you checked with AGCO? You would be surprised that they can still get some of that stuff. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DonDittmar
Date Posted: 21 Jan 2018 at 7:43pm
|
Have a picture of it? I have some lines off a 17 diesel. ------------- Experience is a fancy name for past mistakes. "Great moments are born from great opportunity" 1968 D15D,1962 D19D Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start |
Posted By: LazyDFarms
Date Posted: 26 Jan 2018 at 5:35pm
|
Agco is no go, I don't have a pic because I don't have one, Agco part #70229839 ------------- I'VE DONE MORE WITH LESS!! |
Posted By: Joe(TX)
Date Posted: 26 Jan 2018 at 5:59pm
|
That line has a hose section in the middle. If is just the hose part the is bad, there are crimp fittings that are made to braze or weld to the tubes and then crimp in place. I had to do this for the lift cylinder hoses on my 180, and also on a 72 GMC power steering hose. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: Kevin in WA
Date Posted: 27 Jan 2018 at 10:00am
| If you decide to make one, be sure it is long enough to extend down below oil level in the front support or the pump will suck air back through, the pump has a passage from the relief valve area to the inlet port. |
Posted By: Lon(MN)
Date Posted: 01 Feb 2018 at 7:43am
| I parted out an early D17 diesel last fall. All the power steering lines are there. I don't have a parts book can you send a picture? |
Posted By: orangereborn
Date Posted: 01 Feb 2018 at 11:23am
I'll try this...
|