Farm Equipment - Anyway to put a valve stem on

Print Page | Close Window

Anyway to put a valve stem on

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14598
Printed Date: 03 Feb 2025 at 3:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Anyway to put a valve stem on

Posted By: Byron WC in SW Wi
Subject: Anyway to put a valve stem on
Date Posted: 01 Jul 2010 at 5:43pm

from the outside? I just blew one off my dad's Case tractor raking hay. I'm not a tire expert but am pretty sure it needs to be removed from the rim right?

Thank you,
Byron

Replies:

Posted By: LouSWPA
Date Posted: 01 Jul 2010 at 5:49pm

'fraid so!

Posted By: wkpoor
Date Posted: 01 Jul 2010 at 6:23pm

Tubless? If so you just need to break the bead on the stem side to be able to reach in enough to get another started in the hole and pulled through.

Posted By: Dusty MI
Date Posted: 01 Jul 2010 at 7:56pm

I just did 2 on a 3415 Simplicity, just like wkpoor said, used a little Murphy's Oil Soap. Made them slide right in.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"