Farm Equipment - Broke PTO lever off D17

Print Page | Close Window

Broke PTO lever off D17

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14579
Printed Date: 03 Feb 2025 at 2:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Broke PTO lever off D17

Posted By: stroketech
Subject: Broke PTO lever off D17
Date Posted: 01 Jul 2010 at 7:42am

Hi everyone. I've got a Series IV D17. The PTO engagement lever by my left foot broke off flush with the trans housing. Is there anyway to access this from the cover on the other side where the hydraulic lines go into the trans housing? I'm hoping this doesnt have to be split for something this small.

Replies:

Posted By: JC-WI
Date Posted: 01 Jul 2010 at 9:17am

If the lever broke off the shaft, try drilling s few holes in the lever and weld it back on through the holes. remember to weld for just a few seconds and then cool with water then weld again so you keep shaft in tractor cool so it doesn't melt the seal in housing.