160 Hydraulic Remotes Valve
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14557
Printed Date: 03 Feb 2025 at 4:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 160 Hydraulic Remotes Valve
Posted By: Fellenz
Subject: 160 Hydraulic Remotes Valve
Date Posted: 30 Jun 2010 at 7:08pm
|
Hello, Our 160 has what I believe is a sticking pressure relief in the remote valve assembly. I have torn the valve apart once, freed the stuck piece (it was rusted in place) polished it and put it back together, this worked for a few weeks but not it is acting up again. I'm planning to tear into it again soon but was also wondering if anyone has one of these valves for sale, ours is the single remote valve but we would be even more interested in the double valve if it would bolt up. If no one has one of these for sale I would also appreciate any advice on what to do differently next time I have it torn apart to prevent future problems. Thanks, Erik Fellenz |
Replies:
Posted By: kip in cny
Date Posted: 30 Jun 2010 at 8:28pm
|
take it apart again its just dirt in it. Have you changed the tranny/hyd oil ? you may have a bounch of stuff in it. ------------- 160 CA 920diesel 5020 HD-3 |
Posted By: allisd2112
Date Posted: 30 Jun 2010 at 8:49pm
| I have a 160 that I parted out. by looking at it I think you could bolt this one on to yours to make a double valve. maybe some one else knows. let me know if Interested. |
Posted By: Fellenz
Date Posted: 01 Jul 2010 at 6:52pm
|
allisd2112, I'm interested in the valve you have, I won't have a chance to tear into this tractor for probably another week or so but will take pictures when I do so you'll be able to see if there are any differences that would cause problems trying to bolt up the dual spool valve. How much are you asking for the valve? Was it working correctly before you parted out the tractor? I am also looking for seat parts, a new dashboard, sway bars for the three point, an OEM top link and the steel mesh that is welded into the front of the hood if you have any of these parts. Thanks, Erik Fellenz www.fellenzfamilyfarm.com |
Posted By: allisd2112
Date Posted: 01 Jul 2010 at 9:02pm
| I may have some seat parts,none of the other things. I'll take 75.00 for the valve. tractor was non running when parted.If Interested you can have the rear end and trans and all motor parts and every thing else for 500.00 need the room!!! |
Posted By: Fellenz
Date Posted: 02 Jul 2010 at 7:09am
|
Email sent. Thanks, Erik |
allisd2112 wrote: