CA rocker arm torque spec
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=145539
Printed Date: 05 Oct 2024 at 1:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA rocker arm torque spec
Posted By: rustyorange45
Subject: CA rocker arm torque spec
Date Posted: 17 Dec 2017 at 9:07am
|
What is the torque spec for a CA rocker arm assembly? The four nuts holding the pedestals to the head. Thanks, Tim ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Replies:
Posted By: Dick L
Date Posted: 17 Dec 2017 at 9:47am
I have always assumed the studs are grade 5 and torqued around 20 foot pounds or slightly more. I have a box of the aluminum stands that were broken/cracked that I also assumed they were over tightened because of how they were cracked. Torque standards for a 3/8" grade five bolt is 25 foot pounds. I have not found any of the stamped steel stands broken.
|