Farm Equipment - WD hand clutch pivot

Print Page | Close Window

WD hand clutch pivot

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=145158
Printed Date: 15 May 2025 at 12:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD hand clutch pivot

Posted By: Matt Tallant
Subject: WD hand clutch pivot
Date Posted: 06 Dec 2017 at 11:24am

Can it be changed with tranny still in frame?

Replies:

Posted By: Gary(VA)
Date Posted: 06 Dec 2017 at 11:47am

It would be easier to just remove the side rail. Pull off top of trans. I couldn't get mine to move out so I cut it of and drove it through. Freeze the new pin a bit before installing will help.

Posted By: Gary(VA)
Date Posted: 06 Dec 2017 at 11:50am

Should have also said that except for early tractors there are bushings in the handle to change. I had the right side drill to just drill the old ones out. I would think you might be able to drill out one that never had them. If you need the drill but if you don't have that size just let me know and you can borrow it.
Actually just put the weights on I got from you this past weekend.

Posted By: Matt Tallant
Date Posted: 06 Dec 2017 at 4:00pm

Send me a text Gary 540-953-1556

Posted By: Lon(MN)
Date Posted: 07 Dec 2017 at 6:51am

I used a six foot pry bar, used the frame rail as a pivot and pushed it in.