WTB Allis Chalmers 5050 rear rim and grille
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144987
Printed Date: 26 Aug 2025 at 10:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WTB Allis Chalmers 5050 rear rim and grille
Posted By: bozrae
Subject: WTB Allis Chalmers 5050 rear rim and grille
Date Posted: 01 Dec 2017 at 6:53am
|
Looking for a good rear rim for an Allis Chalmers 5050 with FWA. The rim size is 13" x 30". The closer to the Grand Rapids Michigan area the better. As far as I know only the 4 wheel drives had the 30" rear rims, the 2 wheel drives had 28" rims. It needs to be the Fiat style wheels as shown in the picture. I've seen new 14" wide rims, but mine are 13" with a 14.9" width tire. Also looking for a Grille with screen.  ------------- D15D, D17G, 170G, 175D, and two 5050FWA |
Replies:
Posted By: Gary Burnett
Date Posted: 01 Dec 2017 at 7:58am
|
The Oliver 1365 used a 30" rim its Fiat built same style rim, I'd have to check the width. Really I can't see one inch making much difference on those rims. |
Posted By: Gary Burnett
Date Posted: 01 Dec 2017 at 9:40am
|
I measured a rim the 1365 rim is 13" wide so it'd be an exact fit for your 5050 30" rim.Some Fiat built Longs also had 30" rims they'd probably be the same. |
Posted By: bozrae
Date Posted: 01 Dec 2017 at 2:00pm
|
Thank you, that's good to know. Did you have a 1365 rim for sale? ------------- D15D, D17G, 170G, 175D, and two 5050FWA |
Posted By: Gary Burnett
Date Posted: 02 Dec 2017 at 7:09am
|
I only have one spare good rim and am running 2 1365 tractors so I guess I better keep the spare.I do have a grille though for the 5050 came off a 5040. |
Posted By: john(MI)
Date Posted: 02 Dec 2017 at 10:13am
|
I bought a new PA rim from a guy north of GRR. He had quite a few rims in his barn. If he didn't have it, he might be able to make it. Look on CL for Tractor Tires in the Grand Rapids section. I'm not sure I have his contact info, but I'll look. You might be able to get a new blank rim and weld those mounting brackets to it. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: bozrae
Date Posted: 03 Dec 2017 at 10:46am
|
Thanks for the tip. I think I have seen his listing of rims before, but don't remember seeing the size I needed, but it may be worth while giving him a call. Steve ------------- D15D, D17G, 170G, 175D, and two 5050FWA |
Posted By: bozrae
Date Posted: 12 Dec 2017 at 7:48pm
|
Still looking for a rim and grill. ------------- D15D, D17G, 170G, 175D, and two 5050FWA |
Posted By: Sugarmaker
Date Posted: 13 Dec 2017 at 9:21am
|
Grill available in above post (Gary). ???? My cousin just bought a 5050, two wheel drive with loader. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: bozrae
Date Posted: 15 Dec 2017 at 6:11am
|
Sent Gary a PM. ------------- D15D, D17G, 170G, 175D, and two 5050FWA |