Will a Allis Chalmers model 17 loader fit a Wd??
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144821
Printed Date: 16 Nov 2024 at 5:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Will a Allis Chalmers model 17 loader fit a Wd??
Posted By: baverwolf
Subject: Will a Allis Chalmers model 17 loader fit a Wd??
Date Posted: 26 Nov 2017 at 7:45pm
| Picked up an allis Chalmers model 17 loader recently. Guy I bought it from says it was on a wd. I was under the assumption that the model 17 only fit the D17??? |
Replies:
Posted By: rustyorange45
Date Posted: 26 Nov 2017 at 7:58pm
|
If it has the WD mounts it will fit. My WD45 had one on it when I bought it. I am sure someone will correct me if I am wrong! ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: Gary
Date Posted: 27 Nov 2017 at 5:46am
|
A Model 17 loader mounts to the rear axle L & R housings with special brackets that attach to the axle housing bolts. A Model 9 for a WD usually clamped to the L & R side frames. Like Rusty said, if it has the D-17 rear brackets, it may work. Gary |
Posted By: baverwolf
Date Posted: 27 Nov 2017 at 7:22am
|
Thanks for the replies everyone. Anyone have a model 17 on a Wd or Wd45 that could shoot a few pics of how it's mounted? This loader is missing the rear mounts so ill probably have to fabricate them. Thanks! Ben |
Posted By: Gary
Date Posted: 27 Nov 2017 at 2:50pm
|
If you sign up with 'Grandpastractors.com' there is a great link to all the early Allis Loaders Allis Parts Catalog No. D47 Farm Loaders May 1965 D-17 rear brackets on page 78 Gary http://grandpastractor.com/kunena/allis-chalmers-tractors.html" rel="nofollow - http://grandpastractor.com/kunena/allis-chalmers-tractors.html .................................................................... http://grandpastractor.com/kunena/allis-chalmers-equipment/685-allis-chalmers-farm-loaders-may-1965.html |
Posted By: Dave (NE)
Date Posted: 27 Nov 2017 at 6:35pm
| I had a #17 on my '45 for a while. All the mounting holes for the loader bracket did not match up with existing holes on the '45 frame. The axle mounting worked ok. Note, the '17 is high pressure low volume, so if you put it on a '17 IV it will not lift more than about 1,000# - voice of experience. But, still works for most stuff and I do like it on my '17 IV. |
Posted By: baverwolf
Date Posted: 27 Nov 2017 at 10:08pm
|
Gary wrote:Posted By: baverwolf
Date Posted: 27 Nov 2017 at 10:12pm
I'm guessing you just drilled your own mounting holes? Also, is the rear mount the same for the Wd45 and the D17? I couldn't find any different mounts in the parts book in the link at grandpa's tractors, but thought I'd ask. Thanks! Ben |
Posted By: Gary
Date Posted: 28 Nov 2017 at 5:20am
|
Baverwolf As I mentioned above: "A Model 9 for a WD usually clamped to the L & R side frames" If you look in the index at the front, the Model 9 loader ( which is for WD and WD-45) is on page 65. The rear of the loader frame clamps to the tractor 'side frame' with 4 'J bolts, each side, as shown in the picture. Gary |