Farm Equipment - Hydraulic Speed

Print Page | Close Window

Hydraulic Speed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144624
Printed Date: 24 Jun 2025 at 6:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic Speed

Posted By: tsid
Subject: Hydraulic Speed
Date Posted: 20 Nov 2017 at 11:22am

I will start with this...Not a mechanic, do my best, but I run the tractor. Have an AC 7040, put a bale processor on it (vermeer bp 9000). I cannot get enough power in my hydraulics to run it. At full throttle 3000 rpm, it is barley getting the job done. I know there has to be something that I can adjust to speed this up. PLEASE HELP.

Replies:

Posted By: ryan(IN)
Date Posted: 20 Nov 2017 at 11:31am

There should be a small rod below the seat that will allow you to adjust the flow of the remote valve. It only adjusts one so you may have to reach behind the valves and twist the control that way from the outside.

-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62

Posted By: tsid
Date Posted: 20 Nov 2017 at 11:33am

Thank you! I will start there.

Posted By: MACK
Date Posted: 20 Nov 2017 at 9:19pm

Are you saying the hydraulics don't run the hydraulic motor fast enough, or not enough pressure to move the hydraulic cylinders? MACK

Posted By: tsid
Date Posted: 21 Nov 2017 at 9:25am

Well, its both. The motor on the feeder is not turning fast enough, along with the cylinders not moving fast enough.