2300 disc help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144458
Printed Date: 24 Aug 2025 at 6:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 2300 disc help
Posted By: rudyk
Subject: 2300 disc help
Date Posted: 14 Nov 2017 at 3:51pm
Looking at a 13' 2300 disc
Needs a bearing for sure, he says the others are good all blades look good
Any opinions or rough value estimate
All info is greatly appreciated
|
Replies:
Posted By: Mikez
Date Posted: 14 Nov 2017 at 4:09pm
The bearings are still available. And the spools are to.
I bought one maybe five years ago for I think $6 or $700. It needed more then I thought. The rear sets still had original paint but the fronts were bad. Both gang bolts were bent, I put ad in old allis and scored one NOS and one used, then I bought new bearings and blades, it had been used all loose so some of the spools were wore bad as well as the center spacers, I think only needed two spools. I took and picked out the best spacers and only replaced the worst ones, like one or two on each side. The one side I took and cut down blades to use as backing plates and the side I got the used gang bolt he sent me some with it. Now inside the spacers between bearings there's a square tube that the blades go on. I just went to iron shop and got what fit the gang bolt and inside blade. Think I covered what I did, and now I have a good sound set of discs, sorry was long winded
|
Posted By: rudyk
Date Posted: 14 Nov 2017 at 8:44pm
|
Did it turn out to be a good disc for ya
|
Posted By: Mikez
Date Posted: 14 Nov 2017 at 9:49pm
Posted By: Tim (Cent.WI)
Date Posted: 16 Nov 2017 at 9:06am
|
I bought a pretty nice 15' last year for $750.00 needed one blade, I diced over 150 acres with it and it worked great.
|
Posted By: Tim (Cent.WI)
Date Posted: 16 Nov 2017 at 9:07am
|
On another note I saw a smaller one, I think it was a 13' go for somewhere around $1300.00 this fall at an auction. The smaller ones usually go a bit higher.
|
|