Farm Equipment - Newswanger tractor sale

Print Page | Close Window

Newswanger tractor sale

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144376
Printed Date: 05 May 2024 at 9:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Newswanger tractor sale

Posted By: *DougW
Subject: Newswanger tractor sale
Date Posted: 11 Nov 2017 at 3:40pm

D-21 recent restoration. $19600; D-19 diesel recent overhaul and paint$14000; D-17 series 4 3 point $7600; D-15 series 1 gas. Nice paint $3000; D-14$$2600 D-12 newer paint 3 point $3800 D-10 low hours $4100; 200 with cab good paint $9000; '56 wd45 desiel $10100; IB was running but something locked up,$3500; 220 runs good working clothes $12000; 39 RC runs but needed mag work $900; '57 B snap coupler $1400; C nice $1150; G with hydrant and cult $5400; 40 combine original $250; These were the highlites. I think prices are correct. A large crowd for a two hour sale.

Replies:

Posted By: B26240
Date Posted: 11 Nov 2017 at 3:55pm

Sellers should be happy with those results!!

Posted By: Gary
Date Posted: 11 Nov 2017 at 4:08pm

Link to Auction List:

http://www.auctionzip.com/cgi-bin/auctionview.cgi?lid=2954316&kwd=allis&zip=17545&category=0" rel="nofollow - http://www.auctionzip.com/cgi-bin/auctionview.cgi?lid=2954316&kwd=allis&zip=17545&category=0

Posted By: Acdiesel
Date Posted: 11 Nov 2017 at 6:17pm

thanks for posting these

-------------
D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf
D15 SER.2 DIESEL,D15 ser.II nf
D12 SER.I, D10 Ser.II
2-720'S

Gmc,caterpillar
I'm a pharmacist (farm assist) with a PHD (post hole digger)

Posted By: Richardmo
Date Posted: 11 Nov 2017 at 6:32pm

Can you give the WD Oxnard high crop price?

Thanks,

Posted By: *DougW
Date Posted: 11 Nov 2017 at 7:39pm

Not sure if it was an Oxnard, someone else said no. Regular rims were on with slide rails to adjust width. Tractor was loose but not running, brought $1700. I'm not familiar with Oxnard set up. Tires were tall, on rim supported with shims off of regular rim???? Maybe 10 by 38 my guess

Posted By: Richardmo
Date Posted: 11 Nov 2017 at 7:46pm

It was the one with the regular 28" rear rims and they welded 38" over them.

Raised the front knees about 4 ".

Here is the link to the tractor I am talking about.

http://www.auctionzip.com/Full-Image/2954316/fp13.cgi" rel="nofollow - http://www.auctionzip.com/Full-Image/2954316/fp13.cgi

Posted By: *DougW
Date Posted: 11 Nov 2017 at 8:34pm

Front end looks right. Back wheels were same look but less professional