Farm Equipment - Adjusting WD45 WFE

Print Page | Close Window

Adjusting WD45 WFE

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14389
Printed Date: 02 Feb 2025 at 8:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adjusting WD45 WFE

Posted By: Osage_Orange
Subject: Adjusting WD45 WFE
Date Posted: 26 Jun 2010 at 4:42pm

What is the procedure for moving the tie rod ends outward? I removed the bolt and spread the clamp near the wheel, placed a small hydraulic jack between center of tractor and steering lever on outer spindle, but it does not want to move. Some help from the ranks of "The Orangemen" would be appreciated.

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?

Replies:

Posted By: CTuckerNWIL
Date Posted: 26 Jun 2010 at 4:52pm

There was a post about this a couple weeks ago. I think the answer was some heat.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Don(MO)
Date Posted: 26 Jun 2010 at 4:55pm

Get the trusty old torch out and put the heat to it. After you get it moved out put some anti seize on them then the next time you move the front in or out it will slide right out. Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Osage_Orange
Date Posted: 26 Jun 2010 at 6:06pm

Thanks fellas. Heat it shall be! I was concerned there might be some threads somewhere inside.

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?