Woods Belly Mower ?'s
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143822
Printed Date: 16 Nov 2024 at 2:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Woods Belly Mower ?'s
Posted By: rustyorange45
Subject: Woods Belly Mower ?'s
Date Posted: 25 Oct 2017 at 10:37pm
|
Will the spindles, housings, and pulleys interchange between a L306CA mower and L59CA mower? Will anything else interchange as well? Thanks, Tim ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Replies:
Posted By: Butch(OH)
Date Posted: 26 Oct 2017 at 6:43am
|
The housings will interchange. The spindles will as long as they come from a L prefix mower, difference being left hand threads for the blade bolts. By the way the bearings for a Woods belly mower spindle is the same set number as used for the front wheel outer bearing of any 60s 70s Chevy car with drum brakes and a darn sight cheaper at any car parts place than from Woods. |
Posted By: Brian F(IL)
Date Posted: 26 Oct 2017 at 7:43am
| I had a bearing go out on a spindle on my Woods L-306 many years ago. By the time I priced all the parts to fix it (bearings, cones, seals, etc.) it was only a few dollars more to buy a whole new spindle. I did the latter. It was much easier. |
Posted By: Hubert (Ga)engine7
Date Posted: 26 Oct 2017 at 8:33am
|
I bought whole spindles from our local tractor dealer that were for a New Holland mower. They were less expensive and as far as I could tell were the same spindles. ------------- Just an old country boy saved by the grace of God. |
Posted By: rustyorange45
Date Posted: 26 Oct 2017 at 11:42am
|
I don't need spindles, I just wanted to know if the parts would interchange. And yes, Woods parts are expensive but what isn't. I have a L59 deck already and I am going to pick up a L306 deck today. If the parts interchange, great! Thanks, Tim ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: Ted J
Date Posted: 26 Oct 2017 at 3:43pm
|
Hubert, got any numbers for us?? I don't need one right now, but........ Did you know that Murphy and I are best friends,,,,,,I think.... ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: Hubert (Ga)engine7
Date Posted: 26 Oct 2017 at 3:56pm
Been several years and I didn't write the numbers down but I will see if I can find that invoice. ------------- Just an old country boy saved by the grace of God. |
Ted J wrote:Posted By: Hubnut
Date Posted: 26 Oct 2017 at 5:44pm
|
The blade attaching hardware is different for the L59 and L306 I have. In the manual too. Apparently, there is a clutch design in the L306 to permit slipping that is different in the L59. I know, I just ordered all new attaching hardware from Woods. ------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H |