900 hyd lift
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143786
Printed Date: 01 Oct 2024 at 11:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 900 hyd lift
Posted By: Mikez
Subject: 900 hyd lift
Date Posted: 24 Oct 2017 at 10:17pm
| Hi all. How hard is it to take the hyd lift out out of a simplicity and put it in a 914. Thanks |
Replies:
Posted By: Mikez
Date Posted: 07 Nov 2017 at 10:47pm
| My other idea to nephews 914 with him being able to lift plow is to take hyd lift out of a simplicity and put it in his. How hard of job you think that is. Thanks |
Posted By: ac720nut
Date Posted: 08 Nov 2017 at 5:07am
| My 916 has hyd lift and I'ld think be a matter of just changing parts |
Posted By: TOMIA
Date Posted: 08 Nov 2017 at 5:22am
|
There is another option and that is to install an electric lift. |
Posted By: Mikez
Date Posted: 08 Nov 2017 at 7:07am
| Yea I had thought of electric lift. My 912s has that. I don't have any laying around. Have the hyd lift on a parts tractor. Unless someone had one for good price |
Posted By: JCSinPITTS,PA
Date Posted: 09 Nov 2017 at 4:18pm
| u need to ask this at SIMPLETRACTORS as I think the hydraulic ports on the trans are different when u have hdy lift installed |
Posted By: Mikez
Date Posted: 10 Nov 2017 at 7:18pm
| Oh I didn't think of that part of it. I'm not a member over there |
Posted By: Jim Hancock
Date Posted: 10 Nov 2017 at 9:31pm
|
I picked up an electric lift earlier this year at http://www.progressiveautomations.com" rel="nofollow - www.progressiveautomations.com and I'm very happy with it. ------------- How blessed we are by HIS GRACE! |
Posted By: ShaunE
Date Posted: 22 Nov 2017 at 8:35am
If the Hydro filters are in the same physical location on both tractors, the transfer of components is fairly easy if you have the time. Charge pump shims may need to be switched from hydro unit to hydro unit as I believe the units with hydraulic lift had a higher pressure. Best advise is to sign up at simple tractors & post there as many have done this conversion. I do have a complete electric lift. If you are interested, PM me. But personally, I'd rather have the hydraulic lift.
|
Mikez wrote:Posted By: Mikez
Date Posted: 22 Nov 2017 at 3:06pm
|
Ok have to check that out and think about that as well. Thank you. In your opinion what would be the best, or easiest way to go. Put the rear sleeve hitch on with cable in in a way that it counter weights the blade on front, or hyd lift, or electric lift. Thanks |
Posted By: Gary
Date Posted: 22 Nov 2017 at 4:37pm
|
Adding a 'counter balance weight' on at the rear would definitely be the easiest. You keep adding additional weight until the blade and rear weight are practically balanced. That also prevents a lot of wear on the edger bar at the bottom of the blade. Gary |