Farm Equipment - Loader for 6080

Print Page | Close Window

Loader for 6080

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143693
Printed Date: 15 Nov 2024 at 5:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Loader for 6080

Posted By: WNYBill
Subject: Loader for 6080
Date Posted: 22 Oct 2017 at 8:24am

Found a 6080 4WD but it has no loader, where would I start looking and how much should I plan on spending? Otheres I have seen plumb into and operate by the rear remotes, how do you use the remotes if you have the loader on?

This tractor has no muffler, only a chrome pipe, good or bad? Also has 18.4 x 34 rears, it has < 2000 hours showing, so did they come that way? Or should I be suspect of the hours?

Bill

Replies:

Posted By: LB0442
Date Posted: 23 Oct 2017 at 9:11am

Mine came with a factory loader. When I need a remote I let the bucket drop so there is no pressure on the lines and unhook that set of remotes to use. If I need both it is fairly easy to unhook the loader with the factory stands. I think eventually I will set up a joystick on the power beyond, just haven't really needed to yet. Our local tractor salvage has a selection of loaders, maybe check in your area?