Tire and rim
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14286
Printed Date: 02 Feb 2025 at 4:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Tire and rim
Posted By: john n/il.
Subject: Tire and rim
Date Posted: 23 Jun 2010 at 8:09pm
|
Whats the easiest way to mount the rim and tire.Hub on tractor first then rim and tire or is it better to mount center hub on rim with tire on the ground.We just got done painting a d17 and thats all we have left to do.Thanks
|
Replies:
Posted By: FredW
Date Posted: 23 Jun 2010 at 8:22pm
|
I would hang the wheel on tractor and the roll the tire and rim under wheel, seems easier for me. You can slide eccentrics in position on rail and bolt fast. Fred
|
Posted By: john n/il.
Date Posted: 23 Jun 2010 at 8:34pm
|
Thanks for your input fred,have a nice day.
|
Posted By: GregLawlerMinn
Date Posted: 24 Jun 2010 at 7:24am
I always install the hubs to the rims before placing the tires on the tractor. Lean the outer rim on the wall with rails at 12,3,6,9 O'clock positions and tire tread facing the correct way. Place the 1st eccentric on the bottom rail, set the hub on the eccentric, and finger tighten the two bolts; proceed with installing the two side ones and finally the top ones in the same manner (you may have to slide the last one or two down the rail to get it into place). Works better if you have another pair of hands to help.
-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|