Farm Equipment - john deere 2010

Print Page | Close Window

john deere 2010

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14284
Printed Date: 02 Feb 2025 at 5:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: john deere 2010

Posted By: rich
Subject: john deere 2010
Date Posted: 23 Jun 2010 at 6:50pm

my friend has a jd 2010 gas tractor, it starts and runs good but it won't rev up or produce any rpms, cleaned the carb and bowl but still won't go. does anybody have any advice. thanks rich

Replies:

Posted By: Charlie175
Date Posted: 23 Jun 2010 at 7:54pm

Does the governor work? Can you move the throttle at the carb and have it change RPM?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: Gerald J.
Date Posted: 23 Jun 2010 at 9:38pm

Check the carburetor fuel inlet adapter, it usually has a screen and that eventually plugs with varnish to drastically limit fuel flow.

Gerald J.

Posted By: rich
Date Posted: 24 Jun 2010 at 9:41am

The carb and inlet is clean and no it won't rev up using the throttle on the carb was hoping it was something other than the governor thanks. Rich

Posted By: Gerald J.
Date Posted: 24 Jun 2010 at 10:41am

plugged main jet in carburetor? birds nest in air intake? mud dauber build up in intake manifold? Opening the throttle on the carburetor should affect engine speed. Broken throttle plate shaft?

Gerald J.