Print Page | Close Window

Gearing for wc

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142313
Printed Date: 24 Nov 2024 at 12:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Gearing for wc
Posted By: Robacpuller
Subject: Gearing for wc
Date Posted: 09 Sep 2017 at 10:18pm
Can a wd trans. Fit in a wc and r they geared diferently. Can a wc reared gears b changed to lower gear ratio



Replies:
Posted By: mike a
Date Posted: 10 Sep 2017 at 8:40am
rc gears can be put into a wc housing,easier to swap the whole rc rear-end,geared about 1 gear lower


Posted By: AaronSEIA
Date Posted: 10 Sep 2017 at 12:20pm
Tranny cannot be swapped. An RC ring and pinion is what most use to get slowed down. Or find a 2 speed gearbox.
AaronSEIA


Posted By: Robacpuller
Date Posted: 13 Sep 2017 at 10:01pm
Did not know they made a 2 speed gear box for wc. Do they mount behind trans. Any Allis folks have one?


Posted By: CAL(KS)
Date Posted: 14 Sep 2017 at 8:14am
it goes on the pinion shaft behind the trans where the cult lift is and you have to have a short pinion like on the styled tractors with the release for it to fit.  there are overdrives and underdrives and are some both I think.  several different companies made them


-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: Robacpuller
Date Posted: 14 Sep 2017 at 6:07pm
Cal u don't have one do u? What about yhe unstyled wc,is there a different one?


Posted By: CAL(KS)
Date Posted: 15 Sep 2017 at 7:45am
no I don't have one.  would like to find one for my brothers 38 unstyled.   couple guys in my club run them.  as far as I know you cannot use one in an unstyled tractor unless you switch out the pinion in which case usually just means the whole pumpkin as its easier.

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: Larry(OH)
Date Posted: 19 Sep 2017 at 7:44am
Shereman is Overdrive or Underdrive.  Can be found but pricey.  I used a complete rear end out of a speed patrol that is a lower gear like a RC.  second gear is about what old first gear was.  1st is low and reverse is slow

-------------
'40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie

*ALLIS EXPRESS contact*

I can explain it to you, BUT I cannot understand it for you!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net