Farm Equipment - vicon 165 mower

Print Page | Close Window

vicon 165 mower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14193
Printed Date: 02 Feb 2025 at 1:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: vicon 165 mower

Posted By: wheatbreeder
Subject: vicon 165 mower
Date Posted: 21 Jun 2010 at 8:06pm

I need seals for the lift cylinder on a Vicon CM 165

Wheatbreeder

Morley

-------------
Farm stuff 8050,6690,175,F2,5050,WD

Replies:

Posted By: jls
Date Posted: 21 Jun 2010 at 8:43pm

take the old ones out (or disasemble and take the rod)and go to a hydrolic speciality shop, most have drawers full of assorted sizes of metric and American sizes of O'rings and seals. 3 point on my Case was no longer avail, so shop stacked 2 smaller ones and told me not to pull stumps with it but they should work fine for back blade and bale spear. they were right.

Posted By: wheatbreeder
Date Posted: 21 Jun 2010 at 8:49pm

I took the cylinder to our local AGCO dealer the took it about , and they can't find the correct seals one ring is a felt fabic

-------------
Farm stuff 8050,6690,175,F2,5050,WD