D19 Weight  
       
      Printed From: Unofficial Allis
        Category:  Other Topics
       Forum Name:  Pulling Forum
       Forum Description:  Forum dedicated to Tractor and Garden Pulling
       URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141921
       Printed Date: 03 Nov 2025 at 11:11pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
      
 
  
      Topic: D19 Weight
       
      Posted By: BrianC,Ont
       Subject: D19 Weight
       Date Posted: 28 Aug 2017 at 10:36pm
       
      
        
          
	
Can anyone give me an educated guess what this early D19 gas tractor would weigh. It has 18.4-34 tires with cast centres, and a 3ph off of a 190, I think. I would like to pull in the 6500 lb class on thurs night. It is serial # 1041.    
  ------------- 35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
          | 
         
        
      
 
  Replies: 
       
      Posted By: Dans 7080
       
      Date Posted: 29 Aug 2017 at 5:54am
       
      
        
          
	
It would be close without calcium.
  ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door
          | 
         
        
        
       
      
      Posted By: Gary
       
      Date Posted: 29 Aug 2017 at 6:07am
       
      
        
          
	
 Per 'Tractor Data' web site
  6650 to 11,210 pounds.
  Gary
   http://www.tractordata.com/farm-tractors/000/0/1/19-allis-chalmers-d19.html" rel="nofollow - http://www.tractordata.com/farm-tractors/000/0/1/19-allis-chalmers-d19.html  
          | 
         
        
        
       
      
      Posted By: bradley6874
       
      Date Posted: 29 Aug 2017 at 8:24am
       
      
        
          
	
Brian you'll be close  mine is 5500 with no hydrolics no snap couple and a real light front end with cast CT wheels and no water
  ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul
          | 
         
        
        
       
      
      Posted By: BrianC,Ont
       
      Date Posted: 29 Aug 2017 at 10:49am
       
      
        
          
	
Ok thanks guys. I seen the tractor data, but was unsure if that was with 3 point or snap coupler. I will be looking for a narrow front for this tractor. Preferably in Ontario. Also do the make a hub that you can bolt a 38" rim to. I would like to put 18.4-38 on it. 
  ------------- 35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
          | 
         
        
        
       
      
      Posted By: HARVESTMOONPULLER
       
      Date Posted: 29 Aug 2017 at 9:27pm
       
      
        
          | 
	
We pull 6500 with a narrow front diesel but nothing else taken off. I would guess youll be over weight.
          | 
         
        
        
       
      
      Posted By: DSeries4
       
      Date Posted: 03 Sep 2017 at 10:32am
       
      
        
          
	
Looks like one of the Nesbitt tractors!
 
  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185,  '77 175, '84 8030, '85 6080
          | 
         
        
        
       
      
      Posted By: bradley6874
       
      Date Posted: 05 Sep 2017 at 8:04pm
       
      
        
          
	
Well whats it weigh how did you do
  ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul
          | 
         
        
        
       
      
     |