B starter question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141851
Printed Date: 18 Sep 2025 at 1:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B starter question
Posted By: Hubnut
Subject: B starter question
Date Posted: 26 Aug 2017 at 6:21pm
I have a newly rebuilt B starter I acquired in a deal. Unfortunately, it has the stud for power--not the mechanical switch. Can I modify this stud somehow to make it work with the mechanical switch? I don't really want to set it up for electric start.
-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H
|
Replies:
Posted By: Gary
Date Posted: 26 Aug 2017 at 7:10pm
Being a starter is electric start.
I think you mean a Solenoid.
Gary
|
Posted By: Dick L
Date Posted: 27 Aug 2017 at 8:17am
|
You can switch the threaded stud with the solid stud for the starter switch.
|
Posted By: Steve in NJ
Date Posted: 27 Aug 2017 at 10:28am
As Dick mentioned, you can change the stud over to the pad style for the switch, but actually, the Starter with stud working with a Starter relay actually works much better than the old style switches which once worn, causes starting issues. You can hide the relay in the tool box, and run the cable out the side hole where it normally would exit to the Starter motor. Your choice...
Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|