Farm Equipment - Need help with part no. on 460 loader

Print Page | Close Window

Need help with part no. on 460 loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141801
Printed Date: 19 Apr 2025 at 5:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need help with part no. on 460 loader

Posted By: mark-east-tn
Subject: Need help with part no. on 460 loader
Date Posted: 24 Aug 2017 at 11:21pm

Ive looked on agco parts book web site and have not had any luck , my tilt cylinder on my 460 loader is leaking a little and id like to order a seal kit for it if anyone can help with part no. . Its the cylinder that tilts bucket .Thanks

Replies:

Posted By: Matt (Jordan,MN)
Date Posted: 24 Aug 2017 at 11:35pm

There was 2 different model 460 loaders. 1 was for the 160 and the other was for the 6060,6080. If its the newer one for the 6000 series I have a seal kit in the shop I can get a number off of.

-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/

Posted By: mark-east-tn
Date Posted: 24 Aug 2017 at 11:41pm

yes its on a 6060 thanks for help .

Posted By: V8cat359
Date Posted: 25 Aug 2017 at 5:31am

What is the difference between the two loaders other than the oil reservoir in the left bracket on a 160?

Posted By: LB0442
Date Posted: 25 Aug 2017 at 8:23am

I resealed both the tilt and raise cylinders on my 6080. Part #71503831, all 4 are the same.

Posted By: mark-east-tn
Date Posted: 25 Aug 2017 at 8:55am

Thanks I'll check with Brenda and see if she can get me one , thanks again for the help .

Posted By: LB0442
Date Posted: 25 Aug 2017 at 2:50pm

That would be the exact same place I got mine. Sandy Lake is great to deal with.

Posted By: Tswarner67
Date Posted: 19 Apr 2025 at 4:24am

Touching base on this post . What’s the difference between this and one for the 160? My 160 tilt cylinder is leaking pretty good . Would the same kit work for it ?

Posted By: DrAllis
Date Posted: 19 Apr 2025 at 8:13am

Two completely different loaders built years apart. A 460 loader for a One-Sixty tractor uses seal kits from the 400 or 500 series loaders as used on the D-series primarily.