Farm Equipment - Trans Fluid in a G?

Print Page | Close Window

Trans Fluid in a G?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14159
Printed Date: 02 Feb 2025 at 1:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Trans Fluid in a G?

Posted By: Italy Hill Produce
Subject: Trans Fluid in a G?
Date Posted: 21 Jun 2010 at 7:27am

Hello Just wanted to double check what weight/type of fluid I should be putting in the trans of my G, I would assume regular old 85/90 gear oil, but I wanted to see if there are any advantages to going heavier etc? It is a G with the hydraulics..

Thanks!
Jonathan

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Replies:

Posted By: CTuckerNWIL
Date Posted: 21 Jun 2010 at 7:33am

If you have hydraulics, you want a 20W non foaming oil such as the hytran fluid at your local farm store.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Italy Hill Produce
Date Posted: 21 Jun 2010 at 1:10pm

Thanks! Topped it up and figured out that the belt pulley has to be on for the hydraulics to work.. Duh... Just like an 8N....

So the tool bar now goes up and down, though I have a feeling that I'll be replacing the seals in the cylinder soon...

Now I just have widen out the front end and figure out exactly how the plow goes on and I'll be in business!

Jonathan

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Posted By: Dave(inMA)
Date Posted: 21 Jun 2010 at 2:59pm

Jonathon, I can send you a link to directions for attaching the single bottom plow - let me know.

-------------
WC, CA, D14, WD45

Posted By: Italy Hill Produce
Date Posted: 22 Jun 2010 at 6:20am

Thanks, i got her hooked up and did some terrible plowing... soils too heavy/hard, tractor's too light...

Anyone want a plow setup for a G??? It's just missing a coulter wheel and the actual part that bolts to the front axle (I borrowed them from a neighbor)

I need to get another cultivator setup if anyone has one to sell/swap for a plow...

Thanks

Jonathan

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12

Posted By: Dave(inMA)
Date Posted: 22 Jun 2010 at 7:32am

IHP, I'm guessing that the G (10hp and not much weight) might be challenged in the plowing dept! Guess you'll have to add a heavier tractor for plowing - I recommend the CA with its 2-14 SC plow. As I mentioned in the pm I sent you, I'm looking for some of the front toolbar parts for my G.

-------------
WC, CA, D14, WD45

Posted By: Italy Hill Produce
Date Posted: 22 Jun 2010 at 7:40am

PM replied.

Yeah we have other bigger tractors and plows, I was just hoping that it would work well for the smaller garden plots... But I think where the G's really shine is in the cultivating department...

It definately had plenty of power for pushing the plow, just our soils are pretty heavy and hard for such a light tractor....

-------------
G tractor and an All Crop 66
Also Kubota MX5100F and M9540HD12