Farm Equipment - Any D10/D12 anyone is parting out?

Print Page | Close Window

Any D10/D12 anyone is parting out?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14122
Printed Date: 03 Feb 2025 at 3:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Any D10/D12 anyone is parting out?

Posted By: Austin(WI)
Subject: Any D10/D12 anyone is parting out?
Date Posted: 20 Jun 2010 at 7:13am

Looking for the snap coupler drawbar assembly yet. Nearly have the tractor restored but still in need of the non traction booster drawbal assembly.

-------------
"Better By Design"

Replies:

Posted By: GregLawlerMinn
Date Posted: 20 Jun 2010 at 8:36am

Austin

I used the SC parts from my parts CA on my rehab series I D12 (non-TB; front pump). The parts it up pretty good.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Austin(WI)
Date Posted: 20 Jun 2010 at 12:47pm

Is there such thing as a Non traction booster Ca?

-------------
"Better By Design"

Posted By: GregLawlerMinn
Date Posted: 20 Jun 2010 at 5:02pm

Yep. Remove the traction booster linkage rod from the tractor. Then adjust the hyd pumps screws to the hold setting.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Austin(WI)
Date Posted: 20 Jun 2010 at 6:20pm

Okay...that part will work but there is another bracket the fits under the non traction booster model of the D10/D12.

-------------
"Better By Design"

Posted By: stitchjones
Date Posted: 09 Jul 2010 at 11:27am

Is the Hydraulic Pump, Hold Position Valve w/ manual lever on a Model CA Allis Chalmers, the same as the early model cam driven one on a D10 Allis chalmers?

I mNeed the whole assembly.

Note: the number on the Hold Position Valve (CA) is AM 3676-2. Will this work on a D-10.

Help!!!! I have a paralyzed tractor.

Stitchleg from Asheboro, NC

If anyone is parting out an early model D-10 I do need this part if one off a CA will not interchange.