Farm Equipment - Loader on a D15 series2

Print Page | Close Window

Loader on a D15 series2

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=141051
Printed Date: 21 Oct 2025 at 1:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Loader on a D15 series2

Posted By: toddkatz
Subject: Loader on a D15 series2
Date Posted: 02 Aug 2017 at 6:50pm

I found a allis 500 series loader and the seller says plugs into back of tractor. I have a quick disconnect coupler on back. Do I have enough hydraulics to operate or do I Need the pump on front end?

Replies:

Posted By: Gary
Date Posted: 02 Aug 2017 at 7:54pm

The 500 Series loaders are for tractors with 'live hydraulics' like a D-17 Series IV. They use the tractor hydraulic oil reservoir and on-board hydraulic valves.

A D-15 needs a 400 series loader. It has the front mounted hydraulic pump for 'live hydraulics.

The oil reservoir is in the L/H loader frame, and the bucket control valve and the lift control valve are mounted on the L/H loader frame.

Gary

Posted By: Joe(TX)
Date Posted: 03 Aug 2017 at 12:26am

The 500 loaders also could be bought with the oil reservoir in the frame using a front pump.

The 500 was made for the D17 through 190 tractors.

The 500 used larger cylinders.

Pressure is no problem. The speed will be slower using the remotes.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A