Farm Equipment - wd45 parts wanted

Print Page | Close Window

wd45 parts wanted

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14079
Printed Date: 02 Feb 2025 at 11:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd45 parts wanted

Posted By: WIAllis
Subject: wd45 parts wanted
Date Posted: 18 Jun 2010 at 9:49pm

I have a wd45 and the hydraulic pump wouldn't shut off. Went through all the hoopla of resetting everything and still raised when the lever was down. Wtarted taking stuff off and cleaning and looking, checking functions etc... Pulled the hydralic pump off and whala. There's the problem. One cam roller on the pump worn in half and the pin ready to fall out. Another is worn slightly. Metal shavings all over. That explains why the thing wouldn't release. It has metal shavings packed into it. So. does anyone have a hydraulic pump for sale...with the drawbar control on the back side of pump. I would prefer everything hold control,drawbar control, and pump assembly altogether. Just don't trust anything with the shavings.

Replies:

Posted By: Ted in NE-OH
Date Posted: 18 Jun 2010 at 10:15pm

Try Sandy Lake Imp. 888-252-0656

-------------
CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914

Posted By: Fidel513 mo.
Date Posted: 19 Jun 2010 at 12:07am

wiallis i don't have a complete pump,but if you find a good one i would be intrested in your old one for parts to complete my the pump i have in pieces.if you would sell the broke pump let me know. thanks

Posted By: WIAllis
Date Posted: 19 Jun 2010 at 12:55am

I can do that. worked fine and strong. Then was discing and out of nowhere wouldn't drop the discA good cleaning would probably fix the problem, but dont have much spare time to deal with it. Much easier as far as time is concerned to just "bolt on" another unit and keep going.

Posted By: R Aiken
Date Posted: 19 Jun 2010 at 6:44am

I have some WD and WD45 pumps in Ohio.

Posted By: WIAllis
Date Posted: 19 Jun 2010 at 6:59am

how much are u asking? any leaks? good units?

Posted By: R Aiken
Date Posted: 19 Jun 2010 at 7:48am

I will send you a PM with info. and pictures. Richard

Posted By: Fidel513 mo.
Date Posted: 19 Jun 2010 at 8:10am

if all it needs a good cleaning and rollers plungers i could use it. i need the drawbar ontrol hold ing valve and main body. i have the rollers and valves.

Posted By: d17brown
Date Posted: 19 Jun 2010 at 8:29am

i have one 20 miles west of dubuque 50.00$

Posted By: JimD
Date Posted: 19 Jun 2010 at 9:37am

We have a few out there. Would run about $75 + ship though.

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: R Aiken
Date Posted: 19 Jun 2010 at 9:51am

This dont happen verry often. I quoted the highest price of three offers. O well

Posted By: Tony.Or
Date Posted: 19 Jun 2010 at 1:39pm

Hey guys save those roller Plungers , if they are excellent, last i checked they were $183 .59 EACH . Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: Kraig (WI)
Date Posted: 19 Jun 2010 at 2:06pm

Go out to Peanuts (Jakel Tractor) near Humbirb, WI (between Fairchild and Neilsville) It's a tractor junk yard. I was out there this morning.

715-964-1702 or 715-896-0165

Kraig

-------------
7010,D17D,WD45,WD,WC,WC,B,
Gleaner K,60,66,72